Return to DMR page, return to Radios page, helpful tools. Uses a standard USB cable, micro USB on the radio end. Plug is tight at first, be certain to insert the USB cable fully; and right side up. Alinko related radio programming software. Point leader-board. Return to DMR page, return to Radios page, helpful tools. Tips First. Uses a standard USB cable, micro USB on the radio end. Plug is tight at first, be certain to insert the USB cable fully; and right side up.
DMR Repeater
return to DMR page , return to Radios page , helpful tools
Alinco DJ-MD5
Tips First
Alinco Dj Md5 Programming Software Download
* Uses a standard USB cable, micro USB on the radio end. Plug is tight at first, be certain to insert the USB cable fully; and right side up.* Comes with 'gain' flex antenna, no need to purchase an after-market antenna... this one works surprisingly well.
* Click HERE to download the radio program software (if given a choice, do not save this as a text file)
* Click HERE to download the USB driver (may not be needed for Win 10; if given a choice... do not save this as a text file)
* for APRS-GPS to work fully, the radio needs firmware 1.10 or higher.
* comparison pic - AnyTone 878 beside the Alinco... click HERE
Codeplug and Configuration
For a quick & easy pre-made codeplug... left/right click HERE (save as) to download a codeplug that will get you on the air fast(if given a choice, do not save this as a text file).
This is a basic program file with all the digital groups used on Timz DMR repeater, and local analog repeaters as well. There are just two zones, Analog and Timz DMR digital... making operation easy.
After download, load the file into your DJ_MD5 program and make the following changes before burning your radio:
1. Click on Digital; Radio ID list.
2. Click the number 1 at the top of the list
3. Enter in your DMR ID number in the Radio ID box, and then your CallSign in the Radio ID Namebox; then click OK
note: you will need a digital radio ID; it's easy & free. click: https://www.radioid.net/#!
click the box near the bottom of the page: 'I AGREE TO THE ABOVE TERMS AND CONDITIONS', and then click
'Register Account'
4. Save this file under a new name to your computer
5. Then send (write) the file to the radio.
Button configuration when using the above beginners codeplug file:
click HERE to see the registration & activity for the N8NQH DMR repeater on Brandmeisterclick HERE for help in importing the digital contacts list
click HERE for handy DMR Toolz to make your DMR experience better
Click HERE to visit the ARES Ohio Section DMR Radio page
click HERE to read info on basic DMR repeater operational procedures
click HERE for radio codeplugs already configured
click HERE for indepth details about the groups
TimzContact Repeater Administrators
DMR Repeater
Alinco Dj-md5 Programming Software
DJ-X11 Clone Utility & Control software Downloads
This software (a freeware) is for applicable model(s) indicated above. The software detailed below is provided to those who agree to the terms of the software license. When the user selects and clicks download link, agreement to the terms of the software license is inferred and the user is bound by the terms of Alinco,Inc (hereafter 'Alinco') License Agreement. Be sure that you have read and understand the terms of the license agreement before initiating the download of this software.IMPORTANTAn ERW-8, ERW-7 or ERW-4C PC connection cable is necessary to use programs. ERW-7 and 8 can be used for eventual firmware updates of DJ-X11 (except ERW-4C).DownloadPlease download the Zip file from the link below. Unzip it and put the installer file to a directory of your preference.The utility softwareInstallation and UninstallationPlease uninstall older versions through Add / Remove Programs in Windows Control Panel BEFORE installing the new version. Click the installation file and follow the instruction. A short-cut icon will be displayed on the desktop after the installation is completed.Please be sure to install driver software of ERW-7/8 before start using it. Please check Windows system menu>device manager to make sure the port assignment of the cable. [Port (COM and LPT)>USB Serial Port (COM*)] The most common causes of troubles are COM-PORT setting related or missing the installation of the driver-software. If error occurs during the operation, just turn off the DJ-X11, perform a reset (p.101 on the manual) and retry. The com-error of cloning/control software won't cause hardware troubles to the DJ-X11. Sorry, please do not contact us asking how to install or use the program, as the interface is very simple. The updates will be posted here as soon as available. In case you find a bug, please report to export@alinco.co.jp specifying your OS and OS language. Thank you. PreparationsPlease be advised that this utility is much slower than other Alinco editors due to X11's larger memory capacity, complicated and numerous operating parameters.For faster operation, minimize the use of 'Write ALL/Read ALL' commands but use specific write/read commands as much as possible. ERW-7 Connect the mini-plug to the earphone-jack of the DJ-X11 and an USB port on the PC. Press and hold MONI key while turning on to enter to the clone mode. 'CLONE 57600pbs' will be displayed on the LCD of X11. Click on the short-cut icon of the program. The program window will pop up, then select the COM port assignment in the tool-bar > COM-port menu. Please select also the model of your X11 from J (Japanese), E (Europe and world) or T (North America) by checking the circle. An error message will appear when you start reading/writing the data if the model selection is invalid. ERW-8 Connect the mini-USB plug to the back of the EDC-174 charger-stand and an USB port on the PC. By referring to the page 73 [Set-mode configuration], P.83 Key-assignment and P.88 Remote COM port setting on the manual, select the parameter 'Enable'. Click on the short-cut icon of the program. The program window will pop up, then select the COM port assignment in the tool-bar > COM-port menu. Please select also the model of your X11 from J (Japanese), E (Europe and world) or T (North America) by checking the circle. An error message will appear when you start reading/writing the data if the model selection is invalid. Operations
The remote-control softwareInstallation and UninstallationPlease uninstall older versions through Add / Remove Programs in Windows Control Panel BEFORE installing the new version. Click the installation file and follow the instruction. A short-cut icon will be displayed on the desktop after the installation is completed.Please be sure to install driver software of ERW-7/8 before start using it. Please check Windows system menu>device manager to make sure the port assignment of the cable. [Port (COM and LPT)>USB Serial Port (COM*)] The most common causes of troubles are COM-PORT setting related or missing the installation of the driver-software. If error occurs during the operation, just turn off the DJ-X11, perform a reset (p.101 on the manual) and retry. The com-error of cloning/control software won't cause hardware troubles to the DJ-X11. Sorry, please do not contact us asking how to install or use the program, as the interface is very simple. The updates will be posted here as soon as available. In case you find a bug, please report to export@alinco.co.jp specifying your OS and OS language. Thank you. Preparations
Operations* 'Panel operation' allows you to control DJ-X11 using the mouse of your PC as if you actually press keys or rotate knobs on the receiver.[Note] 'Press-and-hold' key operations are not supported such as pressing MAIN key for a second to make it single-monitoring mode. To use Monitor/Mute function, select the 'hold' mode in the set-mode (p.87 MONI key activation setting). * 'Tables' operation allows you to directly enter frequencies, select modes, activate TSQ/DCS decodes etc. Please see below for more details. * Settings menu: COM port : Set the assigned COM port here. You should check the COM assignment when you change the connecting com port of the cables. Freq. Read Suspend : This program periodically communicates with DJ-X11 to correctly display the current frequency setting. In order to use receiver software like AIS or ACARS plotting or recording the receiving signals you should turn this feature off to eliminate pop noises. You can still use the control software regardless of this setting; this parameter is only a display-related. * Help Displays the version ID of the program. Function in Tables operationWhen properly working, the current data such as frequency and modulation mode settings on MAIN/SUB VFO are automatically displayed.1: Frequency display Click on the display to enter the frequency directly through the keyboard of your PC. Press Enter key of the keyboard to set it to the X11. The new frequency will appear on X11's screen if the entered frequency is valid. You don't have to enter whole digits such as 0123.45000, but enough to type 123.45 and press Enter key to set the frequency there. Wrong entry (the freq. that DJ-X11 can't support etc) will be rejected or changed to closest possible frequency. 2: Changing the MAIN/SUB bands Click on the MAIN or SUB field to switch the working band. 3: Preset memories This is the original feature of this program. 10 each channels are available for Main and Sub bands independently from the DJ-X11's memories to be used only in this program. [How to use Preset memories] 1: Click on the 'Memory' check box. 2: Click on any of P1-P10 button to use. A window pops up to enter the frequency and name the memory. Click on OK to enter. 3: Press the Preset key to set the frequency stored in advance. [Note] Invalid data will be rejected and disregarded by the DJ-X11. 4: Output It switches between Audio, Discriminator (DET) and IQ signal outputs. When the IQ output is selected, X11 changes to the Main-band receive mode (IQ output is not available on SUB band). After canceling the IQ output, click on the SUB band field and enter the Sub-band frequency or use Sub-band preset memory channel to recall the Sub-band receive channel. Downloads* I agree and accept all Alinco freeware policy explained by Alinco and download the program(s). Programs are common to DJ-X11T/E.Download DJ-X11 CloneUtility_v3.04 (3.90MB) Download DJ-X11_Control software Ver0904 (0.35MB) * DJ-X11 clone-utility version 2.03 supports DJ-X11K. It is NOT necessary for DJ-X11J/T/E users to update it to v.2.03
|